Monthly Archives: January 2024

No-Demo Renos for Air Quality

No-Demo Renos for Air Quality

As of 2024, home renovation is still very popular in the US, but there’s been some interesting developments, such as “no demo reno”.  Eliminating demolition usually means less cost and less time--two very important commodities in renovation!  I’m waiting for designers to take it a step further to challenge themselves to redesign for air quality on a budget, to be judged by air quality experts.  Of course, you can spend thousands of dollars on the latest HVAC and purification systems, but you can also make a big impact with a lot less.  That’s what I’m talking about!

Whether you live in a sealed upper-storey apartment using forced air all the time or only use natural ventilation via windows and doors, furniture placement can affect the airflow and thus the air quality in your home.  According to a 2022 study, furniture layout is a key factor that affects the direction of airflow in a building. Different furniture heights can block or trap natural air or lower the direction of the airflow, thereby producing microscale positive or negative pressure.  It evaluated a naturally-ventilated school in Thailand which was located in a city which was plagued by high PM2.5 every January and May, mostly due to agricultural burning, and wind-blown dust. Under natural ventilation conditions, the direction of PM 2.5 distribution in the classroom was the same as that of the natural air. The air velocity and PM 2.5 concentration in the classroom were correlated positively, whereas the velocity increased, with the increasing concentration of PM 2.5. Adjusting the furniture layout of the classroom, as well as the size of the openings, affected the airflow and distribution of PM 2.5 within the classroom. 

Another study evaluated the pollution level of new furniture (VOCs).  Just by rearranging the furniture in an office with a forced-air system, there was a notable difference between the best and the worst ventilation effectiveness without any changes in the ventilation.  The key learning points were to: 

1) always try to place the pollution source (new furniture) as far away from your usual breathing zone (like sitting at the desk) as possible and, 

2) try to sit in the upflow field of the airflow.

If you aren’t trying to off-gas any new furniture, here are the rules that enable your HVAC to work at its optimum (How Furniture Placement Affects Your HVAC):

  • Make sure the furniture is not blocking any registers or vents.

  • Place furniture away from walls so that adequate airflow behind the furniture can prevent formation of mildew.  This happens when there is not enough air circulation (stagnation) to prevent humidity from saturating surfaces.  For more on how you can avoid mildew with better air circulation/ventilation, check out our article here.

  • Don’t block any windows or doors when placing large pieces such as couches or dressers near them

If you do need to obstruct a vent, try to use a deflector on the register so that air flow is directed to an open area.  They come in a number of shapes and sizes, even adjustable, to match your register/grille and desired direction of airflow.

How to visualize airflow in your space

There are professional engineering programs that can help “see” airflow, but they take quite a bit of measuring and input to get a simulation.  On the simple side, you can use the following to “see” airflow, and adjusting furniture position, window openings, vent positions and fan positions and speeds to modify air currents.

  • A helium balloon that has neutral buoyancy that “hangs” in the air below the ceiling will move with air currents (you can tie or tape a small weight onto it to adjust height).

  • A bowl of warm water with a chunk of dry ice (frozen CO2) will give off fog that moves with air currents (just be careful to use thick gloves when handling!)

  • Old-fashioned soap bubbles (you can make a wand by twisting a paperclip into a loop and use dish detergent and water) blown straight up into the air will tend to move in the direction of other air currents.

  • Candle flames/smoke may also show the direction of air currents.

  • Tape streamers or tissue paper in doorways to see which direction the air flows (tinsel also works).

  • Anemometers are fun devices to play around with, but unfortunately they usually only work very close to a vent or fan; they don’t move with minimal airflows. 

Windows: Don’t forget to pull back curtains or remove them altogether if you are using natural ventilation, because blocking windows with curtains blocks airflow and light!  Curtains are usually necessary for privacy, but you might consider trying sheer or loosely-woven curtains or a decorative fabric screen placed a foot or two inside the window, for more airflow.  If you want to open windows without letting in pollen or air pollution, check out our Nanofiber PureAir Window Screens and Window Ventilation Filters.

Fans: Portable fans can set atop furniture or even be hung on the wall to increase airflow.  Take the time to clean your ceiling fans and make sure they are running in the right direction (clockwise in the heating season and counter-clockwise for the cooling season).  

Even if you’ve lived in a space for a long time and think you have tried “every possible arrangement” of furniture, the act of rearranging furniture every so often is not futile for the following reasons (Rearranging Furniture Could Help You Use Space More Effectively and Give You a Mental Boost):

  • Moving furniture will expose dirt, dust and allergens so that you can clean under it, improving indoor air quality.

  • Moving it may force you to remove or store clutter that also collects dust

  • Moving furniture could expose other air quality problems like hidden leaks or mildew, pet stains or pest infestations

Better furniture arrangement can help you to feel less stuffy and more energetic, even if the airflow changes are minute.  Just a few last tips before you get busy redesigning a room: 

  • remember to use a measuring tape first before trying to move heavy or large furniture to a new spot! 

  • Have your cleaning supplies at the ready to vacuum up dust, cobwebs, pet hair, etc..

  • Call on your friends not only to help with the moving, but also to lend ideas.  

  • If you don't have plants, consider adding a few strategic plants as natural air purifiers (and a pop of color!)

  • Plugging in a small air purifier with a fan like the  Germ Defender or Upgraded Air Angel Mobile will freshen the air and add airflow on a micro scale.

Photo by Nathan Fertig on Unsplash

Why, when and how do I clean my mini-split unit?

Why, when and how do I clean my mini-split unit?

Mini-splits are the elegant cousins of window AC units (even though some window AC units are pretty darn good-looking nowadays with lower profiles that don’t block your view).   Mini-splits and window AC units have some of the same internal parts, so even though mini-splits are usually less visible tucked up high on walls, they need the same attention as window AC units to perform efficiently and avoid harboring dust and mold.   (If you have a window AC unit, check out our article for deep-cleaning it here).  Dust and condensation (moisture) are the perfect breeding ground in a mini-split for mold, and it’s being blown directly into your indoor air. What we’re looking at today is cleaning the “indoor” part of the mini-split, which is in the top part of the diagram below.  The parts that can get very dirty are: 

  • the dust filter: it’s easy to take this filter(s) out and vacuum or wash it clean with mild soap and water every month

  • the cold coil (also known as the evaporator coil): deep clean at least once a year

  • Fan: deep clean at least once a year

  • the louvered cover (not labeled): deep clean at least once a year. 

Image source: What are Ductless Air Conditioning Systems?

When deep-cleaning the indoor unit, since it can’t be removed from the wall without releasing refrigerant (unlike the way you can lift the whole window AC out of the window and take it outside), cleaning the coils inside will require some good waterproofing to avoid getting water, cleaning fluid and dirt on your wall and floor.

The other inconvenient part about cleaning the indoor part of a mini-split is the location: since most of them are high on a wall, you will need a very sturdy ladder and perhaps someone to help by handing equipment to you as you need it. 

I like this video for a good method of a professional cleaning the indoor part of a mini-split unit.  It shows the preparation and equipment professionals use.   BUT you don’t have to be a professional–you can buy the “bib” cover online and use a simple garden sprayer to approximate the same cleaning power!  Here is a good video of a DIY guy doing an even more thorough job (he removed the blower wheel for cleaning outside) with a bit more detail on how to take off the louvers and cover.   The only things we cannot recommend is:

  • His choice of cleaners, which do contain toxic chemicals, some of which will be released inside.  

  • Also, make sure to wear safety goggles or preferably a full face mask!  You don’t want any moldy dirt to fly into your eyes or mouth while cleaning.

  • You can use a vacuum inside to remove big clumps of dust, however DON’T use a shop vac inside, unless it has a HEPA filter.  If your wet/dry vac doesn’t have a HEPA filter, then use any other vacuum that has a HEPA filter on the dry dust only.

For cleaning the inside unit, you can use:

  • Sturdy ladder

  • Goggles or face mask, (gloves–optional)

  • Flat and phillips screwdrivers (a power screwdriver is optional)

  • (1-2) 5-gallon buckets (at least one for inside, another one if you want to see what comes out of the evaporator drain)

  • Garden or pump sprayer

  • Bib for covering the unit for a cleaner job, $26: if you plan on doing your own maintenance, it’s worth investing in the cover to use every year!

  • Old towels

  • Coil cleaner (see below)

  • HEPA vacuum for any inside vacuuming

Regarding the coil cleaner, most aerosol coil cleaners have a “propellant” that assists with moving the liquid out of the spray can.  These propellants are usually hydrocarbons with VOCs.  You don’t need to buy spray coil cleaner and release this in your home!  Our choice of a non-toxic coil cleaner is Viper Evap+ from Refrigeration Technologies.  According to the Technical Data Sheet, it is the industry’s only non-rinsing evaporator coil cleaner utilizing slow-release enzymes in a synthetic detergent base, which is safe for all metals.  If it is not rinsed off, the enzymes remain on the coils for 72 hours, starving any microbes of oxygen.  The solution is gradually rinsed off by condensate production, which is drained via the condensate line.  It has no VOCs, TAC (toxic air contaminants) or HAP (hazardous air pollutants).  It is to be used full-strength via a pump sprayer (the garden sprayer we mentioned above works just fine). 

There are two natural cleaners we can recommend that are non-toxic.  The best part about these are the light citrus fragrance Please note that you should check the manufacturer literature on your mini-split unit to find out the recommended maximum acidity or alkalinity of any evaporator coil cleaning solutions, because strong acids or bases can eat metal and damage your unit!  Whichever you choose, you can check the acidity with a pH test strip after dilution to make sure it’s in a safe range for your unit.

  • For an acidic cleaner:  Nutribiotic is a grapefruit seed extract (GSE) which is highly acidic and microbial at full concentration (be very careful mixing and using it!) but can be diluted to use as a coil cleaner.  According to the manufacturer, The GSE Liquid Concentrate has a pH of about 2.75 and the Maximum GSE Liquid Concentrate has a pH of about 2.2, which are both very acidic.  In the article we found for using it to clean your car’s air conditioning evaporator coil, it’s recommended to use it at 2x manufacturer’s recommended dilution.  (Recommended is 10 drops per 5 oz water, so 2x strength is 20 drops per 5 oz water).  

  • For a basic (alkaline) cleaner: EarthClean by Earthpaint is a citric acid cleaner that is super-effective on greasy countertops, and when used at the manufacturer’s dilution, degreases safely on stone countertops with no damage.   Alkaline cleaners can remove greasy dust more easily, so if your mini-split is near your kitchen and your unit can tolerate an alkaline cleaner, this might be the best choice.

Mini-splits look great on the wall, but their performance is only as good as their cleanliness.  If you keep up with cleaning the air filter regularly (at least once a month), the unit will work better through the cooling and heating seasons, and won’t be nearly as gross or hard to clean during the yearly deep-cleaning.  You can save money by doing this yourself, but hiring a reputable technician is fine for those who have too many other things going on.  The most important thing is prioritizing good air quality in your home by performing or scheduling this type of cleaning regularly.